Polyurea Grouting Fluid

High Elastic Waterproofing Materials

High Elastic Polyurea Grouting Fluid Waterproofing Materials

Polyurea grouting liquid is a friendly material, non-toxic, VOC-free, highly weather-resistant, highly tough, highly adhesive, and highly impermeable, and can be applied to both dry and wet surfaces. It has high adaptability in terms of erosion resistance, wear resistance, carbonization resistance, frost resistance, and chemical corrosion resistance, and its high solid content enables it to quickly form a film on the surface of concrete or metal, and maintain good results at ambient temperatures between -40℃ and 120℃. Its single component facilitates construction, whether it is grouting, grouting, or brushing or scraping. Ordinary single-component grouting machines or high-pressure grouting machines are fully capable of implementing concrete plugging, grouting, and concrete-metal connection processes; and after molding, it has ultra-high tensile strength and elongation.

Polyurethane Grouting Fluid · Grouting Material · Made In China

Advantages

—

1. Excellent durability, resistant to water immersion, acid and alkali, and high temperatures.
2. Can fully cure in water, tightly bonding with concrete even in humid or submerged conditions.
3. Possesses certain strength and elasticity, reinforcing structures while accommodating deformation.
4. Dense internal structure, outstanding waterproof performance.
5. Non-shrinkage after curing. Insensitive to temperature during curing, can cure under both high and low temperatures.

Polyurethane Grouting Fluid · Grouting Material · Made In China

Operation Notes

—

1. There should be no open water on the base surface of the project, otherwise construction should be done 24 hours after it is drained
Construction should be carried out at temperatures above 5℃. The construction site should be well ventilated and fire-fighting equipment should be placed.
2. After opening the barrel, it should be used as soon as possible, and the time should not exceed 15 minutes; avoid direct exposure to the air for 3. a long time to prevent skin formation.
4. After opening the lid, the unused material should be tightly closed immediately and the remaining material should be used up as soon as possible.
5. Pay attention to protecting the construction site before it is completely dry.

Polyurethane Grouting Fluid · Grouting Material · Made In China

Construction Process

—

Easy to operate, only three steps are needed to seal the leak

STEP 1:Drill diagonal holesalong both sides ofthe crack, payingattention to drillingthrough the crack

STEP 2:Install grouting nailsand tighten them

STEP 3:Pour the materialinto the groutingmachine and startgrouting, filling theentire gap frombottom to top

Polyurethane Grouting Fluid · Grouting Material · Made In China

Product packaging

—

1. Stored in clean, dry and sealed iron drums
2. Transport according to regular product requirements, prevent rain, exposure, squeezing, and collision, and ensure that th packaging is intact.
3. The product should be stored in a ventilated, dry and cool place, away from direct sunlight and rain. The storage temperature should not be higher than 40℃.
4. Under normal storage conditions, the shelf life is 6 months.

Polyurethane Grouting Fluid · Grouting Material · Made In China

Performance

—

Polyurethane Grouting Fluid · Grouting Material · Made In China

Good Extensibility

High Elasticityand Crackresistance

Flexible Rebound

—

High elasticity and crack resistance, with multiple stretching effects, effectively resisting problems such as surface cracking again.

Many Times Pull Upstrong Toughness

High Film Forming Strengthaging Resistance

Wear Resistancelong Use

Polyurethane Grouting Fluid · Grouting Material · Made In China

Why choose Polyurea?

—

High solid content,without shrinkage: Strongtoughness, high elasticity,strong adhesion to cracks,strong adaptability, not affected by thermal expansion and con-traction to prevent leakage

High solid content,without shrinkage:

Compared with epoxy resin,Compare adhesion strength.

Compared with polyurethane,Comparative strength,high pressure resistance.

Machine Constructiondeep Plugging:

After the product is sealed and fused with the substrate,it gradually solidifies and firmly adheres to the supply surface,achieving the effect of deep sealing and waterproofing

Self-Healingresistant To Blisters:Automatic Repair After Puncture Without Water Leakage

Infiltration Leak Sealing / Pilot Leak Sealing / Strong Stretching Force

Solid content>95%:High solid content, can be constructed and formed on anyirregularstructure with curved,inclined, orverticalsurfaces

Self Flowing Seam Recognition:Polyurea products have a new self flowing permeable crack technology

Compared with polyurethane,Comparative strength,high pressure resistance.

Automatic Searchleakage Pointdo,Not Miss Any Leakage Holes:

Superstrong permeability, easy penetration of small molecules,able to penetrate into small cracks in concrete, playing a deep penetration role

Good Weather Resistance,High And Low Temperature Resistance

High temperature resistance without deformation, frost resistance without cracking or hardening

High Temperature Resistance:No Deformation In 100℃ Boiling Water

Resistant To Low Temperature Of -25℃ Without Cracking

It Can Be Bonded And Cured In Water

High resiliencefearlessofsettlementand cracking

Polyurea material, with strong coating toughness and high adhesive strength, can bond with concrete with a strength of about 4mpa resistant to peeling and non peeling

Strong adhesion, strong toughness, buildingsettlement and displacement, adhesive still doesnot crack, stronger joint filling performance, andmore durable

The wall expands and contracts due to heat, and the gaps becomelarger. Polyurea still firmly blocks the gaps as they stretch

Polyurethane Grouting Fluid · Grouting Material · Made In China

Protection Againstimpact

—

Polyurea protection can protect the construction surface from weathering, corrosion, oxidation, ultraviolet radiation,medium resistance, and impact resistance

High Pressure Water Gun Test

Glass Criticalstrike Test

Polyurethane Grouting Fluid · Grouting Material · Made In China

Application Range

—

Civil Engineering: Polyurea grouting is used in dam reinforcement, seepage prevention, and other water conservancy .
Subway Tunnels: It fills gaps between tunnel linings and surrounding rocks, preventing water leakage and ensuring safety.
Bridge Repair: With fast curing and high strength, it repairs cracks and restores load-bearing capacity.
Building Waterproofing: Applied in basements, roofs, and walls to protect structures.
Expansion/Contraction Joints: Adapts to structural movement, effectively preventing water leakage and extending service life.

Polyurethane Grouting Fluid · Grouting Material · Made In China

Why Choose Us?

Jiangsu Lihong Technology Development Co., Ltd. is a national high-tech enterprise integrating R&D, production, sales and technical services. The company is located in the Salt Chemical New Materials Industrial Park in Huai'an City, Jiangsu Province, covering an area of 150 acres. The total investment of the factory exceeds RMB 500 million. Currently, there are 14 production lines that lead the industry with independent innovation, with an annual production capacity of more than 100,000 tons.

Lihong Technology's Production Base: Jiangsu Lihong Technology Development Co., Ltd.
Site：huai'an City, China

Company headquarters: Nanjing Huishang Building Operation Center
Site：Nanjing City, China

Lihong Technology's E-commerce Center: Hefei Daqi New Materials Technology Development Co., Ltd.
Site：Hefei City, China

Lihong Technology's Production Base（Click To Download ）

Lihong Technology · Special Polyurethane Material Developer · Made In China

We are committed to becomea new standard of polyurethane special materials industry!

—

We take the continuous innovation as the driving force, with the internationalization, the globalization vision creates the domestic leading, the international first-class product quality and the enterprise image.

The company mainly deals in five core products:

—

polyether polyols, defoaming agents (including food grade), lubricant base oils, surfactants (including food grade), and waterproof grouting materials.

Lihong Technology · Special Polyurethane Material Developer · Made In China

Lihong Technology's Production Base（Click To Download ）